Most damage to a painting in transit is not dramatic. It is a corner dropped on a loading dock, a parcel tossed onto a conveyor, a cold van followed by a warm room. The Canadian Conservation Institute (CCI), part of the Government of Canada, has studied these hazards closely and publishes its findings openly. What follows draws on that guidance.
Treat this as a practical starting point, not a guarantee. For valuable, very large or unusually fragile work, talk to a professional fine-art shipper or conservator, and confirm with your insurer what your policy requires before anything moves.
Know what you are protecting against
CCI identifies shock as the main concern during handling, and notes that most damage happens in that phase. Small packages suffer most: CCI’s technical bulletin on packaging lists a probable drop height of 122 cm (48 in.) for packages up to 5 kg, falling to 76 cm (30 in.) for packages of 23 to 45 kg, and calls small-parcel networks the most severe environment of all.
Cushioning thickness matters. In CCI’s example of a 76 cm drop, 25 mm of cushioning let through about 77 g of shock, while 76 mm reduced it to about 41 g. For reference, the bulletin says fragile items in medium-sized packages have been shipped safely with shock held to about 45 g.
Climate is the second threat. Low temperatures stiffen paint, and CCI advises against wrapping items that have equilibrated to a relative humidity of 70% or more.
Wrap the painting step by step
CCI’s note on wrapping a framed painting sets out a clear sequence. In short:
- Prepare the room. Pack in a suitable environment, and store cardboard and other moisture-absorbing materials there for at least one day before you begin.
- Protect the vulnerable parts. Fit cushioned covers on fragile frame corners. If the work is glazed, tape the outside of the glass with low-tack tape; CCI suggests considering laminated anti-reflective glass for works over 1 m².
- Build the layers. Lay down bubble wrap (bubble side up) or thin foam, then clean, uncoated polyethylene sheeting of 2 to 4 mil, or Mylar, then rigid cardboard cut to the size of the frame front. CCI’s quick test for uncoated polyethylene: adhesive tape should stick to it well.
- Keep the surface free. Place the painting face down on the cardboard without the paint surface touching it, and fill any gaps with non-abrasive filler so nothing can shift.
- Seal and label. Wrap the plastic fairly tightly and tape all edges, add the outer cushioning layer, mark front and back, and include written unpacking and rewrapping instructions.
Two small habits help the person at the other end: fold one end of carton tape back on itself so it can be removed without a blade, and ask them to peel tape off glass slowly so the glazing does not flex. An unframed canvas should first be mounted in a travel frame before wrapping.
Choose the right container and plan the arrival
For fragile objects, CCI’s reusable double-box design floats a rigid inner box on eight foam corner pads inside a larger outer box. Its example uses a 41 cm inner box in a 61 cm outer box, with polyurethane ester foam, and was evaluated for inner boxes weighing 2.3 to 18 kg.
Cardboard is light and inexpensive and suits local moves, but CCI warns against it where water exposure is possible, noting that sustained high humidity can reduce the strength of some corrugated materials by 50% or more. For crates, CCI recommends plywood panels; for international travel, plywood also helps you avoid ISPM 15 wood-treatment requirements. Put destination details inside the package as well as outside.
Finally, be patient on arrival. CCI says most museum packaging reaches thermal equilibrium with its surroundings within 12 to 24 hours, and wrapped works should not be unwrapped until they are above the dew-point temperature, which is 9°C (49°F) in a room at 20°C and 50% relative humidity. A day of waiting is a small price for a painting that comes out of its wrapping exactly as it went in.
